HP HPE7-A03 Exam Dumps

HP HPE7-A03 Sample Question Answers

HP HPE7-A03 Sample Questions

Question # 1

Which alternative source is best suited for site surveys or simul-ations if no floor plans are available?

A. blank sheet of paper
B. Google Maps
C. simple wall drawings
D. tire escape plan

Answer: D

Show Answer

Question # 2

You are designing a solution with Aruba OS10-based access points and redundant gateways andthese are the requirements:W1-F16E based access pointssupport for tunneled trafficapplication visibilityrogue APslive upgradesAir SliceCloud Guest AuthenticationAi insightsWhich licenses are needed? (Select two.)

A. AP Foundation
B. WIAN Gateway
C. AP Advanced
D. Gateway Foundation

Answer: A,C

Show Answer

Question # 3

which documentation resources con be used for finding validated information on Aruba productsthat assist the architect in building the solution design? (Select three.)

A. product reviews (CNET, Network World)
B. configuration guides
C. datasheets
D. Gartner annual reports
E. competitive documentation
F. validated Solution Guide

Answer: B,C,F

Show Answer

Question # 4

Which licenses are needed in order to use the UXl Client on Zebra (Devices? (Select two.)

A. UXI Cloud Subscription
B. UXl Agent Subscription
C. UXl LTE Subscription
D. Wireless Insights

Answer: A,B

Show Answer

Question # 5

What is the difference between 0M4 and 0M5 cabling? (Select two)

A. 0M4 supports distances up to 100 m. while 0M5 supports distances up to 150 m using 100 GBpstransceivers.
B. 0M5 supports Multiplexing operating in the 850 to 950 nm range, while 0M4 does not
C. 0M5 is approved as wide Band Multimode Fiber (WBMMF). while 0M4 Is not.
D. 0M5 supports speeds up to 100 Gbps. while OM4 does not.

Answer: A,C

Show Answer

Question # 6

Which is true when it comes to Aruba Central licensing for gateways? (Select two.)

A. Aruba Gateway normal licensing is subdivided into three categories: Foundation. Advanced, andFoundation Base.
B. SD-WAN Gateway functionality requires security licensing.
C. Aruba SD-8ranch Gateway licenses allow normal WLAN Gateway features within a campus.
D. Aruba WLAN Gateway licenses allow normal SD-Branch features within a campus.

Answer: B,C

Show Answer

Question # 7

Which platform can be used to demo your solution to a customer? (Select three.)

A. Aruba Support Portal
B. Aruba CX Switch Simulator
C. Aruba Innovation Zone
D. Aruba Solution Exchange
E. your own lab
F. Aruba Demo Experience Platform

Answer: B,C,F

Show Answer

Question # 8

The current IT staff is used to working with legacy Aruba OS-S (ProCurve> equipment. They areworried that they cannot handle Aruba OS-CX switches due to the different command syntax. Whatare two ways to make the transition easier for them? (Select two.)

A. create aliases
B. CL1 Reference Guide for Arouba OS-CX. Aruba OS-Switch, Comware at>d Cisco IOS
C. Aruba CU Bank
D. ASP

Answer: A,B

Show Answer

Question # 9

What are the considerations when using existing MMF and upgrading to equipment capable of 10 GbE speeds? (Select two)

A. length of MMF fiber
B. type of fiber connector
C. type of MMF fiber
D. single fiber tube into cabinet
E. redundant fiber tube into cabinet

Answer: A,C

Show Answer

Question # 10

What are the advantages of using a vSX-pair instead of two discrete switches to connect servers,storage, firewalls, and other workloads?

A. The setup is much easier since both switches are sharing the same configuration.
B. You can save hall the number of licenses needed tor AFC.
C. Both members in a VSX-pair can be upgraded without any downtime for the workload.
D. VMWare-Most can be connected with or without using LACP. regardless of their license.

Answer: C

Show Answer

Question # 11

Which member types require a reboot when doing an In-Service-Software-Upgrade within a VSFstack?

A. Standby
B. Conductor
C. Member
D. all member types

Answer: A

Show Answer

Question # 12

A global cruise line company needs to refresh its current fleet. They win refresh the insides' of theship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LANhardware of the ship. In this refresh, the company will not refresh Us current security requirements.The CIO also wants to limit the number of unused ports in the switches. Future expansion will alwaysmean a refresh of hardware. They start with the smallest ship with a maximum of 800 guestsEach ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distributionswitches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches arelocated in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Eachcabin and technical room gets one single access switch.The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. ofwhich two pairs are available for the interconnect between the core and distribution. The length ofSM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin isconnected by a single 0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technicalroom is connected by a single 0M2 pail to the IDF. with lengths between 100 and 150 meters (320and 500 ft).For each cabin/technical room the customer is looking to replace their current fan-less 25300without changing the requirements, except they need to upgrade the uplink to distribution switch to10GbEto handle the increased network traffic, and the technical rooms need redundant power.The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLANInfrastructure is based on the 200 series Indoor and outdoor APs running instantOS (less than300 APs). the customer has no change in WLAN requirements.The cruise line company will replace its current Internet connection before the LAN/WLAN refresh.The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guestWi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants tobase the design on the ESP architecture from Aruba because Internet connection is guaranteed.Based on best practices, what should you recommend as the correct optic type for the connectionbetween the IDF and the technical rooms?

A. Aruba 106 SFP- LC LRM 220 m MMF Transceiver
B. Aruba 106 SFP+ LC SR 300 m MMF Transceiver
C. Aruba 100 LC BID! 40 km-0 13300 XCVR
D. Aruba 10GBASE-T SFP- RJ-45 30 m Cat6A Transceiver

Answer: B

Show Answer

Question # 13

A global cruise line company needs to refresh its current fleet. They win refresh the insides' of theship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LANhardware of the ship. In this refresh, the company will not refresh Us current security requirements.The CIO also wants to limit the number of unused ports in the switches. Future expansion will alwaysmean a refresh of hardware. They start with the smallest ship with a maximum of 800 guestsEach ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distributionswitches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches arelocated in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Eachcabin and technical room gets one single access switch.The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. ofwhich two pairs are available for the interconnect between the core and distribution. The length ofSM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin isconnected by a single 0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technicalroom is connected by a single 0M2 pail to the IDF. with lengths between 100 and 150 meters (320and 500 ft).For each cabin/technical room the customer is looking to replace their current fan-less 25300without changing the requirements, except they need to upgrade the uplink to distribution switch to10GbEto handle the increased network traffic, and the technical rooms need redundant power.The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLANInfrastructure is based on the 200 series Indoor and outdoor APs running instantOS (less than300 APs). the customer has no change in WLAN requirements.The cruise line company will replace its current Internet connection before the LAN/WLAN refresh.The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guestWi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants tobase the design on the ESP architecture from Aruba because Internet connection is guaranteed.Based on the best practices, what should you recommend as the most cost-effective switch model forthe cabins?

A. HPE Aruba Networking 6200F 12g Class4 PoE 2GSFP+
B. HPE Aruba Networking 6100 246 Class4 PoE 45FP+
C. HPE Aruba Networking 6100126 Classd PoE 26SFP+
D. HPE Aruba Networking 6000 126 Class4 PoE 2GSFP

Answer: A

Show Answer

Question # 14

A global cruise line company needs to refresh its current fleet. They win refresh the insides' of theship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LANhardware of the ship. In this refresh, the company will not refresh Us current security requirements.The CIO also wants to limit the number of unused ports in the switches. Future expansion will alwaysmean a refresh of hardware. They start with the smallest ship with a maximum of 800 guestsEach ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distributionswitches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches arelocated in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Eachcabin and technical room gets one single access switch.The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. ofwhich two pairs are available for the interconnect between the core and distribution. The length ofSM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin isconnected by a single 0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technicalroom is connected by a single 0M2 pail to the IDF. with lengths between 100 and 150 meters (320and 500 ft).For each cabin/technical room the customer is looking to replace their current fan-less 25300without changing the requirements, except they need to upgrade the uplink to distribution switch to10GbEto handle the increased network traffic, and the technical rooms need redundant power.The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLANInfrastructure is based on the 200 series Indoor and outdoor APs running instantOS (less than300 APs). the customer has no change in WLAN requirements.The cruise line company will replace its current Internet connection before the LAN/WLAN refresh.The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guestWi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants tobase the design on the ESP architecture from Aruba because Internet connection is guaranteed.Based on the best practices and customer requirements, what is the correct WUN approach?

A. ArubaOS10 AP only deployment_____________
B. Aruba OSS campus deployment
C. Instant OS 6 deployment
D. Aruba 0510 AP and gateway deployment

Answer: C

Show Answer

Question # 15

A global cruise line company needs to refresh its current fleet. They win refresh the insides' of theship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LANhardware of the ship. In this refresh, the company will not refresh Us current security requirements.The CIO also wants to limit the number of unused ports in the switches. Future expansion will alwaysmean a refresh of hardware. They start with the smallest ship with a maximum of 800 guestsEach ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distributionswitches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches arelocated in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Eachcabin and technical room gets one single access switch.The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. ofwhich two pairs are available for the interconnect between the core and distribution. The length ofSM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin isconnected by a single 0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technicalroom is connected by a single 0M2 pail to the IDF. with lengths between 100 and 150 meters (320and 500 ft).For each cabin/technical room the customer is looking to replace their current fan-less 25300without changing the requirements, except they need to upgrade the uplink to distribution switch to10GbEto handle the increased network traffic, and the technical rooms need redundant power.The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLANInfrastructure is based on the 200 series Indoor and outdoor APs running instantOS (less than300 APs). the customer has no change in WLAN requirements.The cruise line company will replace its current Internet connection before the LAN/WLAN refresh.The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guestWi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants tobase the design on the ESP architecture from Aruba because Internet connection is guaranteed.Based on the best practices, what should you recommend as the correct optic type for theconnection between the IDF and the cabins?

A. Aruba 106 SFP- LC LRM 220 m MMF Transceiver
B. Aruba 10GBASE-T SFP- RJ--35 30 m Cat6A Transceiver
C. Aruba 106 SFP- LC SR 300 m MMF Transceiver
D. Aruba 10G LC BiDi 40 km-D 13300 XCVR

Answer: C

Show Answer