SMRP CMRP Exam Dumps

SMRP CMRP Sample Question Answers

SMRP CMRP Sample Questions

Question # 1

Motor current analysis reveals an unbalanced motor current in excess of 40% when the motor is loaded to over 70% of its nameplate full bad ampere rating. What should you suspect and or what should you do?

A. Do nothing. Current unbalance is normal in a motor that is not fully loaded.
B. Order the motor to be removed from service immediately, since failure due to overheated winding insulation is imminent.
C. Order more on-line tests to confirm the problem, allowing production to continue as long as possible.
D. Atthe first opportunity, shut down the motor and have motor circuit analysis performed to locate the cause so it can be corrected.

Answer: C

Show Answer

Question # 2

Surveys have shown that plants (facilities) with good planning and scheduling systems and good predictive and preventive programs have which ratios of maintenance tasks? (Does not include service to operations or capital projects or turnarounds)

A. 50% of all work is preventive and predictive. 80% of work is planned and scheduled at least one week before execution, 5% of all work is emergency
B. 25% of all work is preventive and predictive. 60% of work is planned and scheduled at least one week before execution, 15% of all work is emergency
C. 95% of all work is preventive and predictive. 90% of work is planned and scheduled at least one week before execution, 5% of all work is emergency
D. 30% of all work is preventive and predictive. 40% of work is planned and scheduled at least one week before execution, 20% of all work is emergency 

Answer: C

Show Answer

Question # 3

What is the importance of the P - F Curve with respect to condition monitoring?

A. The P - F Interval can be utilized as the primary basis for determining the proper condition monitoring interval.
B. The P - F Interval can be utilized to estimate the amount of downtime required to repair the asset.
C. The P - F Interval can be utilized to estimate the amount of time before an asset starts to fail.
D. The P - F Interval can be utilized to estimate the frequency of Preventative Maintenance Tasks.

Answer: A

Show Answer

Question # 4

Which of the following should be considered when designing for maintainability?

A. Total cost of ownership for new equipment
B. Pressure and flow ratings of safety relief valves
C. Location of eyewash stations near hazardous chemical handling areas
D. Accessibility for component assembly disassembly

Answer: D

Show Answer

Question # 5

Which of the following does not apply when monitoring product reject rates?

A. Scrap loss
B. Product downgrade
C. Rework or reapplication
D. Lost production time

Answer: D

Show Answer

Question # 6

For the oil in a pressurized lubrication system, oil samples for analysis and trending should be taken from:

A. The center of flowing oil line upstream of the oil filter, to assure that the sample is representative of the oil leaving the lubricated components.
B. The center of a flowing oil line downstream of the oil filter, to assure that the sample is representative of the oil being supplied to the lubricated components.
C. A low point in the oil sump, to assure that the sample includes wear particles, water, and other contaminants that may have settled out of the oil.
D. The oil sump at a point above the bottom, to assure that the sample does not include wear particles, water, and other contaminants that may have settled out of the oil.

Answer: A

Show Answer

Question # 7

Why is change management essential to the implementation of a Maintenance and Reliability Program?

A. To create an appropriate paradigm shift where required
B. To explain past mistakes and lost profits
C. To overcome the "program-of-the-month" syndrome
D. Because management systems are slow to react

Answer: C

Show Answer

Question # 8

Nearly all infrared imaging systems detect radiation in two distinct radiation bands, shortwave (2-6u) and longwave (8-14u). This would be due to:

A. most objects only emitting in these two wavebands.
B. the atmosphere being fairly transmissive to infrared radiation in these two wavebands.
C. most infrared lens materials being only transmissive in these to wavebands.
D. Infrared detectors being only available in these two wavebands.

Answer: A

Show Answer

Question # 9

Percent overtime maintenance labor hours is:

A. Overtime maintenance labor hours used to maintain assets, divided by the total maintenance labor hours to maintain assets, expressed as a percentage.
B. Total overtime labor hours, divided by the total scheduled maintenance labor hours, expressed as a percentage.
C. Total overtime labor hours, divided by the total maintenance labor hours to maintain assets, expressed as a percentage.
D. Scheduled overtime maintenance labor hours used to maintain assets, divided by scheduled maintenance labor hours to maintain assets, expressed as a percentage.

Answer: A

Show Answer

Question # 10

The Maintainability of a machine may be measured by:

A. Life Cycle Cost.
B. Machine Maintenance Cost.
C. Failure Rate.
D. Mean Time To Repair (MTTR).

Answer: D

Show Answer

Question # 11

The maintenance function should be viewed in value added terms and should be associated with profit and the optimization of maintenance costs. When developing the maintenance budget, it is important to: 

A. Increase last year's budget by approximately 9.5% to 12% and be prepared to reducethe budgeted amount after management reviews the budget.
B. Determine, through benchmarking, the percentage of money spent on maintenance compared to the Replacement Asset Value of equipment.
C. Review the budget from the previous year and increase the budget for the upcoming year based on the effects of inflation.
D. Base the budget on the individual needs of each specific equipment item annually.

Answer: D

Show Answer

Question # 12

What is at the heart or core of the Organization for International Standards (ISO) 9000 series documents concerning quality of products and services?

A. Management of quality assurance processes
B. Human safety and environmental protection
C. How to write quality control documents
D. Procedures, document existence, compliance, and control

Answer: D

Show Answer

Question # 13

A Company produced 80.000 tons of "Good Product" last year, and the Sales department has projected a 5% increase in sales during the coming year. Production Statistics:1.The production line operates 24 hours per day. seven days per week, except for the downtime listed below.2.The production line downtime for maintenance averaged 108 hours per month during the past year.3.The production line was shut down three times during the year due to power interruptions, for a total of 18 hours of downtime.4.The production operators' union has threatened a strike that may last as long as three weeks if it occurs.5.The production rate is expected to stay the same as last year's production rate.6.Power interruption downtime is expected to stay the same as last year.Based on the Production Statistics shown, what is the required production line availability to meet the sales projected for next year?

A. 86.50%
B. 88.50%
C. 89.50%
D. 93.50%

Answer: C

Show Answer

Question # 14

The 'Karl Fischer Method' measures:

A. The count in parts per million (ppm), of coliform bacteria in a sample of cooling tower water.
B. The viscosity of an oil sample based on its flow rate through a calibrated orifice.
C. The conductivity in micro-ohms, of a sample of cooling tower water.
D. The amount of water in a sample of oil, in ppm.

Answer: D

Show Answer

Question # 15

Quality superiority of a product or service can be maintained if the organization

A. Ensures its marketing and field service quality controls are perfect.
B. Holds product specifications constant and historically accurate.
C. Continually promotes its claims to superior quality and market leadership.
D. Continues product or service improvement and has effective market promotion

Answer: D

Show Answer